A three-dimensional numerical simulation was performed using computational fluid
dynamics in the vertical-downward position. The molten pool dynamic behaviors play a …

This study conducted three-dimensional transient numerical simulations of molten pool
behavior for the one pulse one drop mode in the gas metal arc welding process. A high …

From a broad point of view, seam tracking has been one of the main challenges with respect
to welding automation. Several attempts at automation have been successful in seam …

This study performed welding on various welding positions in the flat, overhead, and vertical
down positions using a pulsed gas metal arc welding (P-GMAW) process. Despite the same …

Automatic welding technology is a solution to increase welding productivity and improve
welding quality in offshore pipe welding. To increase welding productivity, it is necessary to …

A tandem welding process is frequently used in the welding of large structures with the aim
of improving productivity and deposition rate. However, in this process, considerable thermal …

High-deposition-rate welding is used in the fabrication of liquefied natural gas tanks from
thick aluminium plates because the weld defect generally increases and the productivity …

The weld quality is highly influenced by various process parameters involved in the process.
This can be achieved by meeting quality requirements of bead geometry. Inadequate depth …

This study performed root pass welding with a V-groove using a pulsed gas metal arc
welding process for mild steel. Welding process parameters such as weaving, root gap size …

Arc sensors have been used in seam tracking and widely studied since the 80s and
commercial arc sensing products for T and V shaped grooves have been developed …