Fabrication of aluminum metal matrix composite through continuous casting route: a review and future directions

DK Saini, PK Jha - Journal of Manufacturing Processes, 2023 - Elsevier
Aluminum Metal matrix composite has replaced traditional metal alloys in many applications
as their use expanded primarily from aerospace and automotive industries. To cope with the …

[HTML][HTML] Turbulence modeling for flows in wall bounded porous media: an analysis based on direct numerical simulations

Y Jin, AV Kuznetsov - Physics of Fluids, 2017 - pubs.aip.org
Various models are available for simulating turbulent flows in porous media. Models based
on the eddy viscosity assumption are often adopted to close the Reynolds stress term. In …

Review on Vertical Twin‐Roll Strip Casting: A Key Technology for Quality Strips

S Sahoo - Journal of Metallurgy, 2016 - Wiley Online Library
Nowadays near‐net‐shape casting technology is an important area of research in the iron
and steel industry. Among different kinds of near‐net‐shape casting process, twin‐roll …

Modeling and experimental validation of rapid cooling and solidification during high-speed twin-roll strip casting of Al-33 wt pct Cu

S Sahoo, A Kumar, BK Dhindaw, S Ghosh - Metallurgical and Materials …, 2012 - Springer
The numerical modeling of heat transfer and solidification during twin-roll strip casting
involves incorporating fluid flow, heat transfer, and phase change in the liquid metals and …

Advanced multi-scale analysis of segregation mechanisms in twin-roll casting of Al-Cu-Li alloys

W Yu, Y Wang, Y Li, H Wang, Z Huang, Z Wang… - Journal of Materials …, 2024 - Elsevier
In this paper, a detailed analysis of the rheological behaviour and segregation mechanisms
within twin-roll casting (TRC) processes for 2060 Al-Cu-Li alloys is presented. Building on …

Numerical modeling of momentum dispersion in porous media based on the pore scale prevalence hypothesis

F Rao, AV Kuznetsov, Y Jin - Transport in Porous Media, 2020 - Springer
A macroscopic model that accounts for the effect of momentum dispersion on flows in porous
media is proposed. The model is based on the pore scale prevalence hypothesis (PSPH) …

Process window prediction of solid-liquid cast-rolling bonding (SLCRB) process through numerical analysis to fabricate bimetallic clad pipes

C Ji, H Huang, J Sun - International Journal of Heat and Mass Transfer, 2018 - Elsevier
The solid-liquid cast-rolling bonding (SLCRB) process to fabricate bimetallic clad pipes was
developed, and the numerical analysis was conducted in order to reduce the exploration …

Modelling of coupling flow and temperature fields in molten pool during twin-roll strip casting process

XM Zhang, ZY Jiang, LM Yang, XH Liu… - Journal of Materials …, 2007 - Elsevier
In twin-roll strip casting process, metal flow and temperature distribution in the molten pool
directly affect the process stability and the quality of products. In this paper, a 3D coupling …

双辊铸轧薄带过程中铸速对熔池内温度场的影响

张晓明, 张军锋, 刘相华, 王国栋 - 东北大学学报(自然科学版), 2006 - xuebao.neu.edu.cn
采用三维流热耦合有限元分析对双辊铸轧不锈钢过程进行模拟, 利用反向方法处理铸辊与熔池之
间的换热边界条件, 研究发现, 随着铸轧速度的提高, 铸带与铸辊之间的热传导系数增大 …

Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting

W Wang, C Lu, L Zhou, P Lyu - Journal of Iron and Steel Research …, 2022 - Springer
Interfacial heat transfer behavior between the molten steel and twin-rolls is a key issue in the
strip casting process, and it has already attracted wide attention from industrial and …