InGaN-based red light-emitting diodes: from traditional to micro-LEDs
InGaN-based LEDs are efficient light sources in the blue–green light range and have been
successfully commercialized in the last decades. Extending their spectral range to the red …
successfully commercialized in the last decades. Extending their spectral range to the red …
Excellent room temperature ammonia gas sensing properties of n-MoS2/p-CuO heterojunction nanoworms
In this work, the MoS 2, CuO and n-MoS 2/p-CuO heterojunction nanoworms thin films were
fabricated on ITO coated glass substrate by DC magnetron sputtering method. The ammonia …
fabricated on ITO coated glass substrate by DC magnetron sputtering method. The ammonia …
Engineering the hot-spots in Au–Ag alloy nanoparticles through meniscus-confined 3D printing for microplastic detection
The escalating concern surrounding microplastic (MP) pollution necessitates urgent
attention and the development of rapid techniques for quantifying extremely low …
attention and the development of rapid techniques for quantifying extremely low …
Multifractal analysis of sputtered indium tin oxide thin film surfaces
The aim of this study was to provide important insights into the micromorphology of sputtered
indium tin oxide (ITO) prepared on glass substrates by direct current (DC) magnetron …
indium tin oxide (ITO) prepared on glass substrates by direct current (DC) magnetron …
Optimal ITO transparent conductive layers for InGaN-based amber/red light-emitting diodes
Fabrication of indium tin oxide (ITO) was optimized for InGaN-based amber/red light-emitting
diodes (LEDs). A radiofrequency sputtering reduced the sheet resistivity of ITO at low …
diodes (LEDs). A radiofrequency sputtering reduced the sheet resistivity of ITO at low …
High mobility transparent conductive Al-doped ZnO thin films by atomic layer deposition
ML Lin, JM Huang, CS Ku, CM Lin, HY Lee… - Journal of Alloys and …, 2017 - Elsevier
The effects of growth temperature on the microstructure, transport and optoelectronic
properties of a series of Al-doped ZnO (AZO) films with thickness of∼ 30 nm deposited on …
properties of a series of Al-doped ZnO (AZO) films with thickness of∼ 30 nm deposited on …
Influence of oxygen concentration on the performance of ultra-thin RF magnetron sputter deposited indium tin oxide films as a top electrode for photovoltaic devices
The opportunity for substantial efficiency enhancements of thin film hydrogenated
amorphous silicon (a-Si: H) solar photovoltaic (PV) cells using plasmonic absorbers requires …
amorphous silicon (a-Si: H) solar photovoltaic (PV) cells using plasmonic absorbers requires …
A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
Recent numerical modeling of plasmonic metallic nanostructures have shown great
potential as a method of light management in thin-film nanodisc-patterned hydrogenated …
potential as a method of light management in thin-film nanodisc-patterned hydrogenated …
Comparison of ITO, In2O3: Zn and In2O3: H transparent conductive oxides as front electrodes for silicon heterojunction solar cell applications
S Li, Z Shi, Z Tang, X Li - Vacuum, 2017 - Elsevier
In this study, we presented a comparative investigation on the electrical, optical, and
structural properties of three types of transparent conductive oxides (TCOs), including tin …
structural properties of three types of transparent conductive oxides (TCOs), including tin …
Role of sputtering power on the microstructural and electro‐optical properties of ITO thin films deposited using DC sputtering technique
A Kosarian, M Shakiba… - IEEJ Transactions on …, 2018 - Wiley Online Library
The effects of sputtering power on the deposition rate as well as the microstructural,
electrical, and optical properties of indium tin oxide (ITO) thin films are investigated in this …
electrical, and optical properties of indium tin oxide (ITO) thin films are investigated in this …