Over the past three decades electrostatic sensors have been proposed, developed and
utilised for the continuous monitoring and measurement of a range of industrial processes …

The lean blowout is the most critical issue in lean premixed gas turbine combustion.
Decades of research into LBO prediction methods have yielded promising results …

The wavelength modulation spectroscopy (WMS) method is typically used in the tunable
diode laser absorption spectroscopy (TDLAS) for spectrum extraction in a noisy background …

Current dry low emission (DLE) gas turbines have extremely low nitrogen oxides (NOx)
emissions, allowing them to comply with stringent environmental regulations. The ultra-low …

Two means can be used to improve the data acquisition rate of the electrical capacitance
tomography (ECT) system with a fixed excitation frequency, ie, improving the capacitance …

Measurement of combustion temperature field is essential for combustion diagnosis. As
intrusive devices for temperature measurement interfere the flow field of flame, nonintrusive …

Electrical capacitance tomography has been widely used in flame monitoring. In this paper,
a dual-modality electrical tomography system was developed for imaging of flame admittivity …

The present work proposed an index to extend the previous lean blowout detection method
to bluff-body stabilized flame at the condition of low Reynolds number. Dynamic …

This paper studies the flame dynamics near lean blowout (LBO) conditions in a stratified
swirl burner. The novel BASIS burner is used and fueled with premixed methane/air mixture …

Lean blow-out (LBO) and thermoacoustic instability (TAI) are common undesirable
occurrences in modern lean-burn turbulent combustion systems, such as fossil-fuel furnaces …