[HTML][HTML] Ti-B-based composite materials: Properties, basic fabrication methods, and fields of application

AS Konstantinov, PM Bazhin, AM Stolin… - Composites Part A …, 2018 - Elsevier
The basic methods of synthesis and consolidation of Ti-B-based composites are reviewed.
Prominence is given to the possibilities of the most important modern methods to …

Nanostructured ceramic composite rods: Synthesis, properties and application

PM Bazhin, EV Kostitsyna, AM Stolin, AM Chizhikov… - Ceramics …, 2019 - Elsevier
The nanostructured ceramic composites based on TiCsingle bondTiB 2 have attracted a
great interest during recent years because they exhibit superior properties combining high …

Production of large compact plates from ceramic powder materials by free SHS compaction

AM Stolin, PM Bazhin, AS Konstantinov, MI Alymov - Doklady Chemistry, 2018 - Springer
Free SHS compaction was tested as a method for producing large compact plates more than
100 mm in size from powders of high-melting inorganic compounds based on titanium …

Effect of TiB orientation on near-threshold fatigue crack propagation in TiB-reinforced Ti-3Al-2.5 V matrix composites treated with heat extrusion

S Kikuchi, S Tamai, T Kawai, Y Nakai, H Kurita… - Materials, 2019 - mdpi.com
TiB-reinforced Ti-3Al-2.5 V matrix composites, in which TiB whiskers are oriented parallel to
the direction of heat extrusion, were fabricated via mechanical alloying and hot isostatic …

Influence of Layer-Thickness Proportions and Their Strength and Elastic Properties on Stress Redistribution during Three-Point Bending of TiB/Ti-Based Two-Layer …

K Khvostunkov, P Bazhin, QQ Ni, A Bazhina… - Metals, 2023 - mdpi.com
A mathematical model was developed to determine the order of failure of layers in a two-
layer ceramics composite and to determine the conditions for achieving the maximum limit …

Mechanical, structural and oxidation behavior of ultra high-temperature ceramic Ti–B–Si hard composite

A Pandey, S Paswan, SK Mishra - Materials Science and Engineering: A, 2022 - Elsevier
Abstract The synthesis of Ultra-High Temperature Ceramic (UHTC), Titanium Diboride–Si
composite TiB 2–Si (Ti–B–Si) composite was carried out by Self-propagating high …

Phase Formation in the SHS of a Ti–B Mixture with the Addition of Si3N4

DY Kovalev, AS Konstantinov, SV Konovalikhin… - … , Explosion, and Shock …, 2020 - Springer
The structure and phase composition of a material obtained via SHS in the combustion of a
87% Ti+ 13% B powder mixture with the addition of Si 3 N 4 is under study. The phase …

Effect of argon and nitrogen environments on the structure and properties of protective cermet coatings based on titanium borides obtained by electric arc surfacing

A Konstantinov, A Chizhikov, A Zhidovich… - Ceramics …, 2024 - Elsevier
The aim of this work was to enhance the mechanical and tribological properties of an alpha
titanium substrate by forming a protective cermet coating on its surface. In this study …

Composite rods by high-temperature gas extrusion of steel cartridges stuffed with reactive Ni–Al powder compacts: Influence of process parameters

FF Galiev, IV Saikov, MI Alymov, SV Konovalikhin… - Intermetallics, 2021 - Elsevier
Steel clad NiAl rods were prepared by high-temperature gas extrusion (HTGE) of steel
cartridges stuffed with reactive Ni–Al powder compacts upon variation in warmup …

MULTISTAGE KINETICS OF THE SYNTHESIS OF Ti-TxCy COMPOSITE

VN Demidov, AG Knyazeva - Nanoscience and Technology: An …, 2019 - dl.begellhouse.com
This work is devoted to the development of a numerical algorithm for the system of kinetic
equations corresponding to the formation of the Ti-T x C y composite with the prospect of …