Additive manufacturing technologies based on melting and solidification have considerable
similarities with fusion-based welding technologies, either by electric arc or high-power …

Inconel 718 is a nickel-ferrous-chromium based superalloy extensively used in the
aerospace sector at elevated temperature up to 650° C due to its better mechanical …

Inconel 718 produced by selective laser melting (SLM) has been characterized with focus on
the microstructure, the dependence of sample orientation on the mechanical properties and …

The additive manufacturing technique selective laser melting (SLM) is compared to forging
and casting regarding differences in microstructure and mechanical properties of Inconel …

Dislocation structures, chemical segregation, γ′, γ ″, δ precipitates, and Laves phase were
quantified within the microstructures of Inconel 718 (IN718) produced by laser powder bed …

Selective laser melting (SLM) technology based on powder bed has been used to
manufacture IN718 samples. The starting material, manufacturing processes, heat treatment …

3D printing results in anisotropy in the microstructure and mechanical properties. The focus
of this study is to investigate the structure, texture and phase evolution of the as-printed and …

Additive layer manufacturing (ALM), using gas tungsten arc welding (GTAW) as heat source,
is a promising technology in producing Inconel 625 components due to significant cost …

Inconel 718 specimens were additively manufactured via selective laser melting (SLM) and
subjected to different post-process heat treatments. Performance under monotonic and …

Powder quality control is essential to obtain parts with suitable mechanical properties in
Selective Laser Melting manufacturing technique. One of the most important advantages of …