Nanocarbon materials, such as carbon nanotube and graphene, are reckoned as the ideal
reinforcement for composites due to their extraordinary intrinsic properties. However, the …

B 4 C has characteristics of low density, good strength, good wear resistance, exceptional
hardness, high elastic modulus and good chemical inertness at room temperature …

A revision on ceramic/graphene composites is presented. The more representative results
for a wide number of bulk composites are compared, making special emphasis on their …

Aiming at the refined microstructure and enhanced thermal conductivity of high-entropy
carbide (HEC) ceramics for high-temperature applications, the addition effect of graphite …

In this paper, the silicon carbide-reduced graphene oxide (SiC/rGO) composites with
different content of rGO are investigated. The hot pressing (HP) at 2100° C for 60 min under …

Boron carbide (B 4 C) ceramic toughened by graphene platelets (GPLs) was prepared by
spark plasma sintering. Nonmetallic sintering aids Al 2 O 3/Y 2 O 3 were used to improve the …

Dense silicon carbide (SiC)-based composites containing up to 20 vol.% of graphene
nanoplatelets (GNPs) were manufactured via a liquid-phase Spark Plasma Sintering (SPS) …

Monolithic B 4 C ceramics suffer from poor machinability, high brittleness and low thermal
conductivity. Here we intend to tackle these problems by incorporating graphene …

Boron carbide/graphene platelet (B 4 C/GPLs) composites have been prepared with a
different weight percent of GPLs as sintering additive and reinforcing phase, hot pressed at …

Silicon carbide/graphene platelet (SiC/GPLs) composites were prepared using different
weight percent of GPLs filler by hot pressing (HP) technology at 2100° C in argon. The …