Surfactants in mechanical alloying/milling: a catch-22 situation
Mechanical alloying/milling technique is characterized by the repeated welding and
fracturing of powder particles in a high-energy ball mill, which often results in excessive cold …
fracturing of powder particles in a high-energy ball mill, which often results in excessive cold …
Structure and magnetic properties of ZrO2-coated Fe powders and Fe/ZrO2 soft magnetic composites
K Geng, Y Xie, L Xu, B Yan - Advanced Powder Technology, 2017 - Elsevier
Fe particles were coated with ZrO 2 nanopowders using mechanical milling method
combined with high temperature recovery annealing process. The effect of milling time on …
combined with high temperature recovery annealing process. The effect of milling time on …
[HTML][HTML] Obtaining and characterisation of thermoelectric Mg2Si compound via wet and dry mechanical alloying and spark plasma sintering
Mg 2 Si thermoelectric compound was obtained by dry and wet (isohexane and benzene)
mechanical alloying route. The Mg 2 Si compound was characterised by X-ray diffraction …
mechanical alloying route. The Mg 2 Si compound was characterised by X-ray diffraction …
Preparation and characterisation of Co–Fe–Ni–M-Si–B (M= Zr, Ti) amorphous powders by wet mechanical alloying
Co-based amorphous alloys were prepared via wet mechanical alloying process starting
from elemental powders. The reference alloy Co 70 Fe 4 Ni 2 Si 15 B 9 (at.%) as well as the …
from elemental powders. The reference alloy Co 70 Fe 4 Ni 2 Si 15 B 9 (at.%) as well as the …
Structural, magnetic and thermal characterization of amorphous FINEMET powders prepared by wet mechanical alloying
Abstract Fe 73.5 Cu 1 Nb 3 Si 13.5 B 9 (at.%) amorphous alloy has been prepared from
elemental powder mixture by wet mechanical alloying route, using benzene as process …
elemental powder mixture by wet mechanical alloying route, using benzene as process …
Synthesis and characterization of the NiFe2O4/Ni3Fe nanocomposite powder and compacts obtained by mechanical milling and spark plasma sintering
Nanocomposite powder and compacts of NiFe 2 O 4/Ni 3 Fe type were synthesized using
mechanical milling and spark plasma sintering (SPS) techniques. The samples have been …
mechanical milling and spark plasma sintering (SPS) techniques. The samples have been …
Effect of High-Energy Ball Milling in Toluene on the Morphology, Phase Evolution, and Contamination for Some Elemental Powders
This study reports the effect of milling time on the carbon content, morphology, crystallite
size, and phase evolution of pure elemental Al, Fe, Ni, Cu, Cr, Mo, Si, Co, W, V, Ta, and Ti …
size, and phase evolution of pure elemental Al, Fe, Ni, Cu, Cr, Mo, Si, Co, W, V, Ta, and Ti …
Synthesis of amorphous Fe75Si20− xMxB5 (M= Ti, Ta, Zr) via wet mechanical alloying and its structural, thermal and magnetic characterisation
Abstract Amorphous Fe 75 Si 15 B 5 M 5 powders with M= Ti, Ta and Zr, were synthesized
by mechanical alloying and their thermal stability, crystalline state, particles morphology and …
by mechanical alloying and their thermal stability, crystalline state, particles morphology and …
Synthesis and characterisation of amorphous Fe38. 5Co38. 5Nb7B15Cu1 powders via mechanosynthesis using industrial raw materials
This work presents a comparative study on the HITPERM type alloy prepared by wet and dry
mechanical alloying. The chosen composition for this study was Fe 38.5 Co 38.5 Nb 7 B 15 …
mechanical alloying. The chosen composition for this study was Fe 38.5 Co 38.5 Nb 7 B 15 …
Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying
Amorphous soft magnetic powder of Co 70 Fe 4 Ni 2 Si 15 B 9 (at.%) was obtained by wet
mechanical alloying starting from elemental powders using benzene as process control …
mechanical alloying starting from elemental powders using benzene as process control …