Solid oxide fuel cells (SOFCs) have been attracting considerable attention as ecologically
friendly and highly efficient power sources with a variety of applications. Modern directions …

In this work, a technology was developed for the formation of BaCe0. 8Sm0. 2O3+ 1 wt%
CuO (BCS-CuO)/Ce0. 8Sm0. 2O1. 9 (SDC) thin-film electrolyte membranes for intermediate …

Nanoscale yttria-stabilized zirconia (YSZ) and La 2 O 3 were used to prepare a composite
coating by electrophoretic deposition (EPD) and sintering to improve the high-temperature …

In the presented study, films from tetragonal Li7La3Zr2O12 were obtained by electrophoretic
deposition (EPD) for the first time. To obtain a continuous and homogeneous coating on Ni …

The strategy to increase the performance of the single solid oxide fuel cell (SOFC) with a
supporting membrane of Ce0. 8Sm0. 2O1. 9 (SDC) electrolyte has been implemented in this …

Thin film technology of lithium-ion solid electrolytes should be developed for the creation of
all-solid-state power sources. Solid electrolytes of the Li7La3Zr2O12 (LLZ) family are one of …

Semiconductors, such as zinc oxide (ZnO), are used in different scientific fields, including
energy. This study applied ZnO thin films on a photovoltaic cell, specifically a dye-sensitized …

This paper presents the development of yttria‐stabilized zirconia–alumina (YSZ–Al2O3)
nanocomposite coatings deposited on Inconel 738LC superalloy substrates using the …

Glazing is the final heat treatment process in the manufacturing of a monolithic zirconia
prosthesis. Herein, the effect of cooling rate during zirconia glazing was investigated. A 3 …

Yttria-stabilized zirconia and flake graphite composite (C/YSZ) coatings were successfully
prepared on a TC4 substrate by electrophoretic co-deposition and sintering at 1100° C …