Addressing planar solid oxide cell degradation mechanisms: A critical review of selected components

SJ McPhail, S Frangini, J Laurencin… - Electrochemical …, 2022 - Wiley Online Library
In this review paper, a critical assessment of the main degradation processes in three key
components of solid oxide fuel cells and electrolysers (negative and positive electrodes and …

Oxygen electrode degradation in solid oxide cells operating in electrolysis and fuel cell modes: LSCF destabilization and interdiffusion at the electrode/electrolyte …

F Monaco, D Ferreira-Sanchez, M Hubert… - International Journal of …, 2021 - Elsevier
Three long-term experiments have been performed in SOEC and SOFC modes at different
operating temperatures. The durability tests confirm a higher degradation in electrolysis …

Enhanced diffusion barrier layers for avoiding degradation in SOFCs aged for 14000 h during 2 years

L Bernadet, J Segura-Ruiz, L Yedra, S Estrade… - Journal of Power …, 2023 - Elsevier
Electrolyte-cathode interfaces are critical regions of solid oxide fuel cells where important
degradation phenomena are localized due to cation interdiffusion and reactivity. State-of-the …

Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution

F Monaco, M Hubert, J Vulliet… - Journal of the …, 2019 - iopscience.iop.org
Two types of solid oxide cells with different Ni-YSZ cermet microstructures have been aged
in electrolysis and fuel cell modes for operating times ranging from 1000 to 15000 hours …

Degradation mechanism of La0. 6Sr0. 4Co0. 2Fe0. 8O3-δ/Gd0. 1Ce0. 9O2-δ composite electrode operated under solid oxide electrolysis and fuel cell conditions

J Laurencin, M Hubert, DF Sanchez, S Pylypko… - Electrochimica …, 2017 - Elsevier
A set of long-term tests (t≥ 1000 h) have been carried out in fuel cell and electrolysis modes
on typical Ni-YSZ//YSZ//LSCF-CGO cells. The degradation rates were found to be higher in …

Design of next-generation ceramic fuel cells and real-time characterization with synchrotron X-ray diffraction computed tomography

T Li, TMM Heenan, MF Rabuni, B Wang… - Nature …, 2019 - nature.com
Ceramic fuel cells offer a clean and efficient means of producing electricity through a variety
of fuels. However, miniaturization of cell dimensions for portable device application remains …

An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product

G Geng, S Barbotin, M Shakoorioskooie, Z Shi… - Cement and Concrete …, 2021 - Elsevier
The ASR products in concrete have various chemical compositions. It is yet unclear whether
and how these products develop micro-expansion upon moisture ingress. This paper …

Iron speciation in blast furnace slag cements

A Mancini, B Lothenbach, G Geng, D Grolimund… - Cement and Concrete …, 2021 - Elsevier
Slag-containing pastes and concretes were analysed by element-specific synchrotron-
based techniques to determine the speciation of iron on crushed materials through spatially …

Iron oxide doped spray dried aluminum oxide granules for selective laser sintering and melting of ceramic parts

S Pfeiffer, K Florio, M Makowska… - Advanced …, 2019 - Wiley Online Library
Powder bed density, flowability, and laser light absorption of the powder strongly influence
the quality and performance of aluminum oxide parts processed by selective laser sintering …

DLSR: a solution to the parallax artefact in X-ray diffraction computed tomography data

A Vamvakeros, AA Coelho, D Matras… - Journal of Applied …, 2020 - journals.iucr.org
A new tomographic reconstruction algorithm is presented, termed direct least-squares
reconstruction (DLSR), which solves the well known parallax problem in X-ray-scattering …