Self-fluxing alloys are used as thermal spray coatings for superimposed tribological and
corrosive stresses. Subsequent fusing of self-fluxing alloy coatings forms a gas-and liquid …

Flame-sprayed NiCrBSi/WC-12Co composite coatings were deposited in different ratios on
the surface of stainless steel. Oxyacetylene flame remelting treatment was applied to …

Developing advanced materials for high-temperature components in supercritical coal-fired
boilers is essential for ensuring their longevity and safety. In this study, NiMoFeCoCrSiB …

This study investigates the improvement of high-temperature oxidation resistance in
supercritical boiler steels at 800° C through vacuum cladding NiCoFeCrMoSi 1.2 B 1.1 HEA …

This article compares the creep testing behavior of AISI 4340 high-strength steel in the as-
received and coated conditions. The coating material used was a NiCrBSi self-fluxing alloy …

In this study, the effect of the coating process and heat-treatment cycles on the
microstructural, mechanical, and tribological properties of NiCrBSi coatings deposited by …

Laser powder bed fusion (L-PBF) is a novel process representing a possible solution for
producing resistant parts using NiCrBSi hard-facing nickel alloys with complex geometry …

Ni-Cr-Si-Fe-B self-fluxing alloys are commonly used in hardfacing applications; in addition,
they are subjected to conditions of wear, corrosion, and high temperatures, but are not used …

Coating efficiency and quality can be significantly improved by carefully optimizing the
coating parameters. Particularly in the flame spray method, the oxygen/fuel ratio, which is …

Tribological tests in real conditions enable obtaining full data on the life of interacting
machine parts. This article presents the results of operational tests on the elements of the …