An updated review on TiNi alloy for biomedical applications

J Zhu, Q Zeng, T Fu - Corrosion Reviews, 2019 - degruyter.com
This manuscript has provided an overview of the development of TiNi alloys and their
applications in biomedicine. The microstructures and properties of TiNi alloys are first …

A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application

M Zarka, B Dikici, M Niinomi, KV Ezirmik, M Nakai… - Vacuum, 2021 - Elsevier
A non-toxic and non-allergic β-type Ti–29Nb–13Ta-4.6 Zr (hereafter abbreviated as TNTZ)
target material was prepared by the vacuum arc-melting process and then hot-forged …

In-situ crystalline TiNi thin films deposited by HiPIMS at a low substrate temperature

X Bai, Q Cai, W Xie, Y Zeng, C Chu, X Zhang - Surface and Coatings …, 2023 - Elsevier
Magnetron sputtered TiNi thin films usually exhibit an amorphous structure and need a high
substrate temperature (> 450° C) or a post-annealing treatment (> 500° C) to promote …

Microstructural characterization, wettability and cytocompatibility of gradient coatings synthesized by gas nitriding of three-layer Ti/Ni/Ti nanolaminates magnetron …

GA Baigonakova, ES Marchenko, YF Yasenchuk… - Surface and Coatings …, 2022 - Elsevier
In the study, gradient coatings with a nanometer thickness were successfully synthesized
from Ti/Ni/Ti nanolaminates on the TiNi substrate in a nitrogen atmosphere at 900° C. A …

[HTML][HTML] Modeling stress-strain nonlinear mechanics via entropy changes on surface wetting using the Born-Oppenheimer approximation

BT Tan, P Wu, F Anariba - Results in Engineering, 2022 - Elsevier
The process of stress-strain nonlinear deformation is fundamental to almost all branches of
science and engineering. Although the mechanical mechanisms of such process are well …

Production of honeycomb-patterned hybrid Ti2AlN/TiNi films and examination of Mechanical, Tribological, Adhesion and Fatigue properties

S Duran, H Çiçek - Surfaces and Interfaces, 2025 - Elsevier
Abstract Honeycomb-patterned hybrid Ti 2 AlN/TiNi films were produced on M2 and Inconel
718 substrates using a magnetron sputtering system. These films were subjected to heat …

Fusion of Ni Plating on CP-Titanium by Electron Beam Single-Track Scanning: Toward a New Approach for Fabricating TiNi Self-Healing Shape Memory Coating

L Wang, M Okugawa, H Konishi, Y Liu, Y Koizumi… - Materials, 2023 - mdpi.com
The limited wear resistance of commercially pure titanium (CP-Ti) hinders its use in abrasive
and erosive environments, despite its good strength–weight ratio and corrosion resistance …

Reaction synthesis of gradient coatings by annealing of three-layer Ti–Ni–Ti nanolaminate magnetron sputtered on the TiNi substrate

ES Marchenko, GA Baigonakova, KM Dubovikov… - Surfaces and …, 2021 - Elsevier
Abstract In this work, Ti-Ni-Ti nanolaminate was deposited on a TiNi substrate by magnetron
sputtering. Subsequent synthesis in Ar at temperatures of 500, 700 and 900° C was carried …

Fatigue and adhesion properties of martensite and austenite phases of TiNi shape memory thin films deposited by magnetron sputtering

H Cicek, I Efeoglu - Surface and Coatings Technology, 2016 - Elsevier
The application area of TiNi shape memory thin film is gradually increasing. Especially
MEMS applications of TiNi film, such as micro-mirror, micro-pump and micro-actuator are …

Effect of Substrate Roughness on Adhesion and Structural Properties of Ti–Ni Shape Memory Alloy Thin Film

D Kim, H Lee, J Bae, H Jeong, B Choi… - … of Nanoscience and …, 2018 - ingentaconnect.com
Ti–Ni shape memory alloy (SMA) thin films are very attractive material for industrial and
medical applications such as micro-actuator, micro-sensors, and stents for blood vessels. An …