Characterization of ferrochrome ash and blast furnace slag based alkali-activated paste and mortar
Ferrochrome ash (FCA) is an industrial waste material which when disposed causes
environmental pollution and health hazard. Therefore, in this paper, FCA replaced up to …
environmental pollution and health hazard. Therefore, in this paper, FCA replaced up to …
The effect of alkaline activators and sand ratio on the physico-mechanical properties of blast furnace slag based mortars
Alkali activation of blast furnace slag with sodium silicate (SS) and sodium hydroxide
(NaOH) or potassium hydroxide (KOH) has been extensively studied, however a …
(NaOH) or potassium hydroxide (KOH) has been extensively studied, however a …
[HTML][HTML] Physical, mechanical and durability properties of eco-friendly engineered geopolymer composites
Engineered geopolymer composite (EGC) is a high-performance material with enhanced
mechanical and durability capabilities. Ground granulated blast furnace slag (GGBFS) and …
mechanical and durability capabilities. Ground granulated blast furnace slag (GGBFS) and …
Utilization and optimization of unweathered and weathered basic oxygen furnace slag aggregates in cement based mortar
The construction industry has been facing scarcity of natural aggregates due to their higher
utilization in concrete and mortar. The diminution of natural resources and the increasing …
utilization in concrete and mortar. The diminution of natural resources and the increasing …
The potential usage of waste ferrochrome slag in alkali-activated mixes
Ferrochrome slag (FCS) is a by-product of the stainless-steel industry which is mostly
discarded in landfills without being efficiently utilized. The production of industrial solid …
discarded in landfills without being efficiently utilized. The production of industrial solid …
Characterization of washing aggregate sludge waste as a novel supplementary cementitious material: Experimental study and life cycle assessment
Washing aggregate sludge (WAS), a waste collected from aggregate quarries, is examined
for its application as a partial substitute of ordinary portland cement (OPC). The raw WAS …
for its application as a partial substitute of ordinary portland cement (OPC). The raw WAS …
Reaction kinetics and properties of pumice-based geopolymer systems cured at room temperature
E Küçükyıldırım, H Yorulmaz, U Durak… - … and Building Materials, 2023 - Elsevier
This research investigated the kinetics of pumice-based geopolymer systems and their
physical and mechanical properties. The effect of the Na 2 SiO 3/NaOH ratio of geopolymer …
physical and mechanical properties. The effect of the Na 2 SiO 3/NaOH ratio of geopolymer …
Properties of cold-bonded and sintered aggregate using washing aggregate sludge and their incorporation in concrete: a promising material
The aggregate makes up about 65–75% of the total volume of concrete and the use of
artificial aggregates manufactured from waste and by-product materials, as an alternative to …
artificial aggregates manufactured from waste and by-product materials, as an alternative to …
[HTML][HTML] New Zealand pumicite as a precursor in producing alkaline cement with aluminate-based activators
This study investigates the activation of New Zealand pumicite (pumice powder) using
sodium aluminate (NaAlO₂) solution, both alone and in combination with 10 M KOH …
sodium aluminate (NaAlO₂) solution, both alone and in combination with 10 M KOH …
Mechanical Properties of a Sustainable Low-Carbon Geopolymer Concrete Using a Pumice-Derived Sodium Silicate Solution
A geopolymer is an inorganic amorphous cementitious material, emerging as an alternative
sustainable binder for greener concrete production over Ordinary Portland Cement (OPC) …
sustainable binder for greener concrete production over Ordinary Portland Cement (OPC) …