Obtaining ultra-high strength in commercial ZK60 wrought alloys is rather difficult by
conventional processes due to their limited precipitation hardening. In this work, we …

ABSTRACT A detailed and systematic investigation on the effect post heat treatment has on
the microstructure evolution and the resultant mechanical properties of the wire arc additive …

In recent years, the rapid advancement of wearable multifunctional bioelectronics has
expanded the horizons of smart biomedical and healthcare applications. However, there is a …

The micro addition of Ca is demonstrated to noticeably increase the strength and ductility of
Mg–Zn–Ce alloy, which is closely correlated with the enhanced alloying segregation at grain …

Abstract The thin-wall Mg-3.82 Y-2.46 Nd-0.56 Zr (WE43) alloy component was fabricated
using cold metal transfer-based wire arc additive manufacturing technology (WAAM-CMT) …

The influence of Y on the microstructure and mechanical properties of Mg-4Gd-0.5 Zr alloy is
investigated. The results show that by increasing the Y content from 0 to 1.2 wt%, the grain …

Herein, benefitting from fully solid-soluted ultrafine Wsingle bond Mo powder, HEA-based
binder, as well as optimized sintering and vacuum heat-treatment technologies, a novel fine …

Abstract A novel Mg-8Gd-2Y-1.5 Zn-1Mn (GYZ-1Mn, wt.%) alloy with extraordinary high-
temperature mechanical properties was developed by introducing RE/Zn segregation on α …

In the pursuit of enhancing the quality and performance of metal-based composite coatings,
we utilized Al 2 O 3 and SiC as reinforcement particles to create Ni62 composite coatings on …

Micro-alloying of Ca in Mg–1Zn-0.3 Nd (wt.%) alloy is found to significantly improve tensile
strength and process high ductility simultaneously. It closely correlates with grain refinement …