It is well known that the mechanical properties of lithium‐ion battery electrodes impact their
electrochemical performance. This is especially critical for Si‐based negative electrodes …

The role of the physicochemical properties of the water-soluble polyacrylic acid (PAA) binder
in the electrochemical performance of highly loaded silicon/graphite 50/50 wt% negative …

Vibrational spectroscopy has been successfully used for decades in studies of the
atmospheric corrosion processes, mainly to identify the nature of corrosion products but also …

The corrosion inhibition of self-assembled octadecylphosphonic acid (ODPA) layers on non-
oxidized and pre-oxidized copper and Langmuir-Blodgett deposited ODPA layers on pre …

Complementary surface and near-surface analytical techniques have been used to explore
a brass (Cu–20Zn) surface before, during, and after exposure in air at 90% relative humidity …

Maturation, which consists of storing the electrode under humid atmosphere before drying
and cell assembly, improves very significantly the cyclability of silicon-based composite …

Self assembled monolayers (SAMs) of n-alkanethiols of different chain length (4, 6, 8, 12,
and 18 carbons in the chain) have been explored as corrosion inhibitors for copper exposed …

The corrosion rate of copper and bronze Cu-8 wt.% Sn increased rapidly when the
concentration of formic or acetic acid in air reached about 300 ppb at 80% relative humidity …

Electrochemical energy storage devices will play a critical role for efficient storage and
reliable on-demand supply to portable electronics, electric and/or plug-in-electric vehicles …

In this article results from earlier studies have been compiled in order to compare the
protection efficiency of self-assembled monolayers (SAM) of alkanethiols for copper, zinc …