The numerical modeling of heat transfer and solidification during twin-roll strip casting
involves incorporating fluid flow, heat transfer, and phase change in the liquid metals and …

In the present work, interfacial heat fluxes betweenthe roll and the solidifying metal were
evaluated in a pilot twin-roll caster used in the production of strips of low-carbon steel. This …

Interfacial heat transfer resistances during the solidification of aluminum-magnesium alloy
strips were measured using the IHCP (Inverse Heat Conduction Problem) method. For these …

The present review of the heat transfer papers published in 0884 is intended to encompass
the English language literature\including some translations of foreign language papers [It …

The world's current output of steel is approximately 0.8 billion tonnes per annum. To put this
figure in perspective, this represents some 97% of the world's supply of all metals on a …

Rapid cooling and solidification during melt spinning and strip casting result from highly
effective heat transfer at the interface between the ribbon and the spinning wheel. In order to …

Transient heat transfer models of the single-wheel meltspinning process are developed and
applied to quantify the effect of process variables including interface depressions on …

Transient heat transfer models of the single wheel melt-spinning process have been
developed, validated and applied to quantify the effect of process variables including …