As one of the most important additive manufacturing (AM) techniques, laser metal deposition
(LMD) has been extensively studied specially during the last few years. Similar to other AM …

Limited slip systems of α structure always play a major role in hindering strength-ductility
synergy improvement of titanium (Ti) alloys. To overcome the strength-ductility trade-off of Ti …

Metastable β titanium alloys possess excellent strain-hardening capability, but suffer from a
low yield strength. As a result, numerous attempts have been made to strengthen this …

The deformation mechanisms of an α ″-martensitic Ti–8Mo alloy were investigated by ex-
situ electron microscopy tensile tests. Two deformation twins,{110}< 1 1¯ 0> α ″and {130}< …

The microstructures of Ti-6Al-4V following laser processing depend primarily on the phase
transformation of β to α, but their development is constrained by the rapidly changing …

Martensitic transitions as a function of cold rolling strain levels, in the range of 5–43%, in the
solution treated condition of metastable β Ti-10V-2Fe-3Al (Ti-1023) alloy has been …

Athermal pure shuffle O′ nanodomains have been reported as a common structural state in
metastable β-Ti alloys. In this study, by integrating thermodynamic databases, first-principles …

Accurate prediction of the martensitic start (Ms) temperature is critical for controlling the β to
α′ phase transformation process in titanium alloys. Based on the Galindo-Nava's model …

The development of biocompatible and biomechanical compatible metallic biomaterials is
essential to fulfilling the needs of humanity, such as enhancing the lifespan and quality of …

Electron beam additive manufacturing with simultaneous feeding of two dissimilar metal
wires was used to obtain Ti-6Al-4V specimens successively alloyed with 0.6, 1.6, 6.0 and 9.7 …