Surface texturing and solid lubricants have demonstrated the ability to substantially reduce
friction and wear under dry conditions. In recent decades, these two technologies have been …

The wear and friction behavior of ultralow wear polytetrafluoroethylene (PTFE)/α-alumina
composites first described by Burris and Sawyer in 2006 has been heavily studied, but the …

The surface microstructure of biomimetic Procambarus clarkia claw was prepared on the
surface of GCr15 steel, then PTFE solid lubricants dispersed with three different hardness …

Abstract Effects of water lubrication and applied load on the formation of PTFE transfer films
and metalsingle bondF bonds during sliding when PTFE filled composites sliding against …

The aim of the present work was to investigate the influence of laser-induced periodic
surface structures (LIPSS) produced by femtosecond laser on the friction behavior of silicon …

The aim of this work is to analyze in more depth a model of particle deposition by
characterizing different parameters such as profile density, bonds and perimeter, and …

In cooperation with SKF, this PhD project focus on the improvement of the tribological
performance of self-lubricating composites for dry sliding bearings. Several novel self …

The wear and friction behavior of ultralow wear polytetrafluoroethylene (PTFE)/α-alumina
composites first described by Burris and Sawyer in 2006 has been studied intensively in the …

Synergetic Effects of Surface Texturing and Solid Lubricants to Tailor Friction and Wear – A
Review Page 1 Tribology International https://doi.org/10.1016/j.triboint.2020.106792 Synergetic …