Most of the challenges experienced by many engineering materials originate from the
surface which later leads to total failure, hence affecting the resultant mechanical properties …

Refractory alloys such as tungsten and molybdenum based alloys with high strength,
thermal/electrical conductivity, low coefficient of thermal expansion and excellent creep …

The effects of selective laser melting (SLM) processing parameters on the microstructure
and corrosion behavior of CX (Corrax) stainless steel were investigated via microstructure …

Refining grain size and adding alloying elements are two complementary approaches for
enhancing the radiation tolerance of existing nuclear materials. Here, we present detailed in …

The corrosion properties of nanostructured 17-4PH stainless steel facilitated by a surface
mechanical attrition treatment (SMAT) process were studied using electrochemical …

Tungsten has been considered as the most promising candidate for plasma-facing materials
(PFMs) in a next generation fusion reactor. It is well known that commercialized ITER …

Achieving ultra-high strength without sacrificing too much ductility is the focus of attention in
nanostructured materials. Here, the strengthening mechanism and property enhancement of …

Welding thermal simulation technology was used to process Fe-23Mn-0.45 C-1.5 Al high-Mn
austenitic steel to reproduce the heat-affected zone (HAZ) and investigate the effect of peak …

In the present study, the mechanical and wear behaviour of the surface-mechanically treated
high-manganese (high-Mn) twinning-induced plasticity (TWIP) steel were investigated. The …

Abstract In this work, Cu-1.5 wt% Y (Cu-Y) and Cu-0.75 wt% Y-0.75 wt% La (Cu-Y-La) were
prepared by mechanical alloying combined with spark plasm sintering and hot rolling …