The main topic of the book are the superconducting dipole and quadrupole magnets needed
in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The …

We report on the design, fabrication, and test of an assembly of stationary pickup coils which
can be used to localize quench origins. After describing the pickup coils configuration, we …

One of the major achievements of the magnet R & D program for the Superconducting Super
Collider (SSC) is the fabrication and test of a series of twenty 5-cm-aperture, 15-m-long …

The coils of superconducting accelerator magnets are wound from two layer Rutherford type
cables, in which large inter-strand coupling currents can arise when the magnets are …

Calorimetric and magnetic measurements of AC loss have been performed on stabrite-
coated Rutherford cable conforming to the Large Hadron Collider (LHC) winding (28 strand) …

The arc sections of the High Energy Booster and the two Collider Rings will need more than
10,000, very large, superconducting dipole and quadrupole magnets. Development work on …

The authors summarize the mechanical performance of the most recent 5-cm-aperture, 15-m-
long SSC dipole magnet prototypes. The magnets were produced at Brookhaven National …

The superconducting super collider (SSC) would have required dipole and quadrupole
magnets with a very high field quality. The field quality is determined mainly by the …

The quest for elementary particles has promoted the development of particle accelerators
producing beams of increasingly higher energies. In a synchrotron-type accelerator, the …

A model describing the influence of eddy currents in superconducting particle accelerator
magnets using flat, two-layer, Rutherford-type cables is developed. The model relies on a …