Abstract Alloy 718 is a Ni-Fe-based superalloy, which has been successfully adapted to
powder bed fusion (PBF) additive manufacturing because of the alloy's adaptability with …

Remarkable residual stress is commonly present in metal components produced by laser
additive manufacturing due to the inherent rapid heating/cooling rate and high temperature …

The defects due to the rapid heating and cooling in powder bed fusion affect significantly the
mechanical properties of additively manufactured as-built parts. However, the effect of …

Metal additive manufacturing is a method of producing metallic parts layer-by-layer. Some
drawbacks, including anisotropy in mechanical properties, detrimental residual stresses …

As a dual-phase α+ β titanium alloy broadly used in the aerospace and biomedicine sectors,
Ti-6Al-4V offers a variety of attractive mechanical properties imparted by its tailorable …

The corrosion resistance of Cr-containing alloy parts made by additive manufacturing can be
significantly improved by a post-treatment of gas-phase-based infusion of concentrated …

Laser powder bed fusion (LPBF) additive manufacturing (AM) unavoidably generates
residual stresses due to sharp thermal gradients and the strong mechanical constraints of …

By using the electrochemical etching technique, pillar arrays with a size of∼ 50–200 nm are
fabricated on the surface of 316L manufactured by laser powder bed fusion. The nanopillars …

This study focuses on regulating the 316 L stainless steel manufactured by selective laser
melting (SLM) microstructure and analyzing the influence between it and the corrosion …

The effect of hot isostatic pressing (HIP) on microstructure, corrosion resistance and passive
film characteristics for heterogeneous martensite stainless steel (MSS) manufactured by …