Metallic materials have long been used in a wide range of industrial applications due to their
outstanding physical and mechanical properties as well as high process latitudes …

Machining is one of the major contributors to the high cost of titanium-based components.
This is as a result of severe tool wear and high volume of waste generated from the …

In the present study, AZ91 Mg alloy was heat treated at 410° C for 6, 12 and 24 h to
investigate the influence of heat treatment on machinability and corrosion behavior. The …

In this work, the machining of ultra-fine-grained pure titanium (UFG Ti) in an integrated
manufacturing process combining severe plastic deformation (SPD) process and machining …

In this study, cryogenic temperature large strain extrusion machining (CT-LSEM) as a severe
plastic deformation (SPD) method is applied to fabricate chips with ultra-fine grained (UFG) …

This study examined the effects of adding ethanol, a typical polar solvent, to an ethylene
glycol–NaCl electrolyte solution used for Ti electropolishing. The electropolishing range was …

In the present work, fine grained AZ91 magnesium alloy–fly ash composite has been
successfully fabricated by friction stir processing. Microhardness measurements show …

AZ91 Mg alloy was considered and friction stir processing (FSP) was adopted to achieve
grain refinement to investigate the effect of grain size and secondary phase on machining …

Based on the experimental results obtained mainly by the authors, the effect of decreasing
the temperature to 77 K using various methods of cryogenic severe plastic deformation (cryo …

The aim of the present work is to modify the microstructure of ZE41 Mg alloy by friction stir
processing (FSP) and to study the influence of microstructure on the corrosion, mechanical …