Silica fume was thermally treated to 700–1100° C in air to transform it into crystals and
cause it to reach the metastable cristobalite state. The phase transition behaviour of the …

The effect of silica polymorphs on the thermomechanical properties of 0, 5, 10, and 20 wt%
silica particles‐reinforced‐based poly (ethylene glycol)(PEG) composites have been studied …

In this study, a temperature-dependent storage modulus model is described and then
implemented in polyethylene glycol (PEG)/silica composite systems. The study began by …

The thermomechanical properties of polyethylene glycol (PEG) composites filled with
various zircon sizes were studied. The zircon powders were derived from natural (well …

The negative Poisson's ratio (NPR) nano-size α-Cristobalite particle/epoxy composites were
prepared and tensile tested. The elastic modulus and strength of the composites were …

Проведен анализ данных научно-технической литературы о применении различных
модификаторов в качестве добавок, повышающих термостойкость полимерных …

The effect of tetragonal‐zirconia nanoparticle inclusion on the temperature‐dependent
storage modulus, or the temperature‐degradation rate, of polyethylene glycol (PEG)‐based …

Data in this article presents the dynamic thermomechanical properties of PEG/amorphous-
silica composites with different silica content, ie 0, 20 and 40% by weight. These composites …

With the development of the powder bed 3D printing process, sand casting can be
performed with methods that are more advanced than the traditional ones, thus enabling …

The mechanical properties of (Polyethylene glycol) PEG4000+ 10 wt% SiO 2 have been
investigated using DMA (Dynamic Mechanical Analysis). SiO2 processed from natural sand …