Monolithic thin-wall components of 2219 Al–Cu alloy are widely used in aerospace and
military fields, and usually treated with solution and quenching to improve their …

The effects of cold work produced by peening processes in residual stress relaxation under
elevated temperatures were investigated. Two types of peening processes namely shot …

Critical aero-engine components such as turbine discs must withstand severe cyclic
stresses, which can eventually lead to low cycle fatigue (LCF) failures. These components …

Large tensile residual stresses generated during cold working processes could negatively
affect the integrity and geometric accuracy of workpieces. The stress relief annealing is one …

Marginal-restraint mandrel-free spinning is an advanced technology for manufacturing
ellipsoidal heads with large diameter-thickness ratios. Nevertheless, the spinning-induced …

The residual stress greatly deteriorates the dimensional stability and the mechanical
performance of the cold radial forged steel tube. In this work, the effect of thermal-vibratory …

Abstract 30SiMn2MoVA is a high-strength alloy steel used for barrels. Cold radial forging
can greatly improve the performance of axles, barrels and other shaft parts. However …

The deep-rolling, mechanical surface treatment was modified by applying heat during
operation on the martensitic stainless steel AISI 420. Fatigue performance of the high …

A micromechanical model for Ni-based superalloys with reinforcement γ′-Ni 3 (AlTi) was
established to investigate the elastic modulus related to crystallographic directions. In this …

Fatigue is one of the common types of failures in engineering components. It is defined as
the failure of a component under repetitive loading. As the research on fatigue progresses …