Millimeter-wave identification—A new short-range radio system for low-power high data-rate applications

P Pursula, T Vaha-Heikkila, A Muller… - … on Microwave theory …, 2008 - ieeexplore.ieee.org
The radio-frequency identification (RFID) concept is expanded to millimeter-wave
frequencies and millimeter-wave identification (MMID) in this paper. The MMID concept and …

Effects of interferences in UHF RFID systems

A Lazaro, D Girbau, R Villarino - Progress In Electromagnetics Research, 2009 - jpier.org
Abstract The Radio Frequency Identification (RFID) applications are growing rapidly,
especially in the UHF frequency band that is being used in inventory management. Passive …

A phase-based ranging method for long-range RFID positioning with quantum tunneling tags

C Qi, F Amato, M Alhassoun… - IEEE Journal of Radio …, 2020 - ieeexplore.ieee.org
This work demonstrates the ability to extend the positioning range of low-powered RFID tags
to distances usually not achievable with other wireless or conventional RFID technologies …

76-to 81-ghz cmos built-in self-test with 72-db c/n and less than 1 ppm frequency tolerance for multi-channel radar applications

M Kohtani, T Murakami, Y Utagawa… - IEEE Journal of Solid …, 2021 - ieeexplore.ieee.org
A built-in self-test (BIST) system with a 72-dB carrier-to-noise ratio (C/N) and less than 1-
ppm frequency tolerance of down-converted BIST tone for a multi-channel radar application …

Investigation on effects of PRF on pulse Doppler sensor accuracy and phase noise role in clutter mitigation

V Kumar, J Ghosh - … Journal of System Assurance Engineering and …, 2024 - Springer
In this article, a qualitative work is carried out based on research of uniform PRF signal for
phase noise analysis and accuracy parameter for RF sensor design. Presence of large …

Range correlation effect on the phase noise of an UHF RFID reader

BJ Jang, H Yoon - IEEE Microwave and Wireless Components …, 2008 - ieeexplore.ieee.org
Phase noise is an important parameter in designing radio frequency (RF) systems since it
can have large influence on system performance. Especially in RF identification (RFID) …

[图书][B] Analysis and design of UHF and millimetre wave radio frequency identification

P Pursula - 2008 - aaltodoc.aalto.fi
Radio frequency identification (RFID) is an asymmetric radio protocol, where uplink
communication (from transponder to reader) is implemented with backscattering modulation …

Making a low-cost software-defined UHF RFID reader

EA Keehr, G Lasser - IEEE Microwave Magazine, 2021 - ieeexplore.ieee.org
In this article, we discuss how one can make, with modern and low-cost tools, a software-
defined ultra high-frequency (UHF) RF identification (RFID) reader. Since we have chosen to …

Baseband noise reduction method using captured TX signal for UHF RFID reader applications

SC Jung, MS Kim, Y Yang - IEEE Transactions on Industrial …, 2011 - ieeexplore.ieee.org
This paper presents a baseband noise reduction method in the receiver for UHF RFID
readers. The signal captured from the transmitter after passing through the main delay …

CMOS DSB transmitter with low TX noise for UHF RFID reader system-on-chip

K Choi, S Yoo, M Kim, H Kim, S Ryu… - IEEE transactions on …, 2010 - ieeexplore.ieee.org
This paper presents a new design for a CMOS double-sideband (DSB) RF transmitter (TX)
integrated circuit (IC) for UHF RF indentification (RFID) reader system-on-chip. Due to the …