The present paper reviews experimental results on the fatigue damage of austenitic–ferritic
duplex steel under various load levels ranging from LCF to VHCF, placing the focus towards …

Mechanical properties of a grade UNS S31803 duplex stainless steel were studied.
Samples were annealed at three different temperatures, 1060° C, 1200° C, and 1300° C, to …

For the successful development of a structure, understanding of mechanical behaviour of the
selected material is an important issue to prevent damage or accidents. Mechanics of the …

The effect of shot peening (SP) treatment on duplex stainless steel S32205 is studied in
order to improve the material surface properties. Residual stress distributions in both ferrite …

The low chromium ferritic stainless steel, 410S, as a candidate control rod drive mechanism
(CRDM) material used in nuclear power plants, was subjected to accelerated thermal aging …

The kinetics of microcrack growth during cycling has been studied in a S32205 duplex
stainless steel in the as-received and aged (100h at 475° C) conditions. Cylindrical …

AISI steel 304 is used in nuclear reactors for the cladding of fuel rods. In the literature,
various mathematical modelling methods such as support vector regression (SVR), artificial …

Tensile properties and cyclic stress–strain response of Z2CND18. 12N austenitic stainless
steel were investigated at the strain rate of 1× 10− 3/s in the temperature range between …

In this research, the effects of isothermal treatments at 475° C on the microstructure and
mechanical properties of a UNS S32304 lean duplex stainless steel were investigated …

In this present study, the influence of isothermal ageing temperature and ageing duration on
microstructural and mechanical properties of a solution treated UNS S32750 Super Duplex …