Objective This paper provides a brief review of relatively new additive manufacturing
technologies for the fabrication of unusual and complex metal and alloy products by laser …

In this paper, a powder feeding laser additive manufacturing technology has been used for
fabricating the Inconel 718 super-alloy. Laves phases of different sizes and morphologies …

Abstract The microstructure of Additive Manufactured (AM) Inconel 718 in general and
Selective Laser Melting (SLM), in particular is different from the material produced by …

In this study Inconel 718 cylinders were fabricated by selective laser melting in either argon
or nitrogen gas from a pre-alloyed powder. As-fabricated cylinders oriented in the build …

Precipitation strengthening is one of the most promising mechanisms to develop high-
performance high entropy alloys (HEAs). However, the design of a reinforcing phase with an …

In this work, a multi-scale approach was applied to reveal the evolution mechanisms of the δ
(Ni 3 Nb) phase and the resultant mechanical responses in wire-arc additive manufactured …

Inconel 718 specimens were additively manufactured via selective laser melting (SLM) and
subjected to different post-process heat treatments. Performance under monotonic and …

Inconel 718 superalloy was fabricated by selective laser melting (SLM) and subsequently
subjected to different heat treatments. Microstructure evolution was examined by X-ray …

The paper studies comparatively on the microstructures and mechanical performances at
elevated temperature of SLM-fabricated Inconel 718 alloy in as-build, SHT 980, SHT 1080 …

Inconel 718 alloy samples were fabricated by selective laser melting (SLM). Microstructure
and precipitation in solution-heat-treated-and double-aging-SLM-made Inconel 718 were …