Researchers frequently turn to the adaptable material known as elastomers for various
industrial products, including soft robotics, astronautics equipment, vehicles, tissue …

Over the past 10 years, materials science and engineering have shown increasing interest
in incorporating lignocellulosic fibers into polymer and hybrid composites (LCF-CPH). This …

In this work, continuous fiber reinforced thermoplastic negative Poisson's ratio structures
(CFNPRSs) with rotating squares are fabricated by 3D printing based on a symmetrical …

In this study, thermoset polymers (synthetic epoxy, bio-epoxy, polyester, and vinyl ester) and
basalt-reinforced (30 wt%) polymer composites were examined for their hardness and …

The large-scale use of composite materials reinforced with carbon–aramid hybrid fabric in
various outdoor applications, which ensures increased mechanical resistance including in …

This study investigates the mechanical and tribological properties of Kevlar-based
composites filled with varying weight percentages (5%, 10%, and 15%) of nano fillers …

In this study, aramid fiber (AF)/phenolic resin prepreg was fabricated by impregnating low
content carbon nanotube (CNT)‐reinforced phenolic resin with aramid fabric through a two …

The current research work involves the fabrication and tribological properties analysis of
constant basalt filler reinforced (30 wt%) bio-based polypropylene (PP) and high density …

Abstract Three‐dimensional (3D) orthogonal woven composites can overcome the
drawback of weak interlaminar strengths in traditional laminated composites and exhibit …

The study focuses on replacing environmentally harmful synthetic materials with natural,
renewable, and biodegradable jute fibers in Bangladesh. The hand-layup method …