The development of efficient and environmental benign non-noble bimetallic nanocatalysts
is highly desirable and attractive in the upgrading of biomass-derived platform compounds …

Manufacturing multi-material part is one of the native advantages of selective laser melting
(SLM) due to its layer-by-layer manufacturing method, which is attracting more and more …

The formation of methane as the undesired side product is one of the major issues in the
water–gas shift (WGS) reaction, particularly for nickel-based catalysts. A detailed study of Ni …

Cu-In intermetallic catalysts are prepared by controlled reduction of CuO-In 2 O 3 with
hydrogen. The effects of reduction temperature on the catalyst properties and CO 2 …

5-(Hydroxymethyl) furfural (HMF) and furfural (FF) have been identified as valuable biomass-
derived fuel precursors suitable for catalytic hydrodeoxygenation (HDO) to produce high …

Mesoporous silica SBA-15 supported iron and cobalt catalysts (Fe–Co/SBA-15) were
prepared and used in the electrochemical (EC) enhanced heterogeneous activation of …

The hydrogenation of furfural to furfuryl alcohol was performed in the presence of a Co/SBA‐
15 catalyst. High selectivity (96%) at a conversion higher than 95% is reported over this …

Inexpensive group VIII metal (ie, Fe, Co, and Ni)-based solid catalysts have been widely
used in various energy transformation processes such as Fischer–Tropsch (F–T) synthesis …

Dry reforming of methane (DRM) is a fascinating reaction that utilizes two greenhouse gases
(CH 4 and CO 2) to produce value-added synthesis gas (syngas, a mixture of CO and H 2) …

To overcome the bottleneck of aggregation of nanomaterials as the main obstacle for their
application in water decontamination processes, it is a promising strategy to confine the …