ZK60 magnesium alloy was processed by selective laser melting (SLM), and the influences
of different process parameters on the quality of the samples were investigated. The …

Upsetting-extrusion (UE) process effectively prepared high-strength ZK61 magnesium alloy
rods with tension/compression symmetry. The influence of upsetting-extrusion temperature …

Mechanical properties and thermal conductivity of Mg-2Zn-Zr alloy were adjusted with mill-
annealing and subsequent aging process. The alloy with preferable thermal conductivity …

Abstract Effects of samarium (Sm) addition on microstructures and tensile properties of Mg−
6.0 Zn− 0.5 Zr (ZK60) alloy under both as-cast and as-extruded states were thoroughly …

Friction stir processing (FSP) was utilized to fabricate high strength and ductility Mg–6Zn
alloys via the co-alloying of 1.0 Y and 0.5 Zr elements. The effect of co-alloying on …

Tension/compression symmetrical ZK61 magnesium alloy rod with fine grain and weak
texture was achieved by compression-extrusion process. The formation mechanism of fine …

The corrosion rates of the Mg alloys immersed in 3.5 wt% NaCl solution saturated with Mg
(OH) 2 were in the following increasing order: WE43B (0.23 mm/y)< EV31A (0.88 mm/y)< …

Magnesium (Mg) and some of its alloys are attracting increasing interest as promising
biodegradable materials for medical applications due to their analogous mechanical …

Abstract Although Zn–Zr intermetallic phases have been frequently reported in solution-
treated Mg–RE–Zn–Zr systems (RE presents rare earth), the types, crystal structures and …

Hydroxyapatite (HA) were synthesized via co-precipitation method using Ca (OH) 2 and H 3
PO 4 and have been electrophoretically deposited on an as-extruded Mg-6Zn-0.5 Zr alloy …