Inconel 718 is one of the most commonly employed alloys for metal additive manufacturing
(MAM) and has a wide range of applications in aircraft, gas turbines, turbocharger rotors …

In the present review, the effect of porosity on the mechanical properties of the fabricated
parts, which are additively manufactured by powder bed fusion and filament extrusion-based …

Inconel superalloys are one of the main classes of materials with good potential for
production using the additive manufacturing process of laser powder bed fusion (PBF-LB) …

The adaptation of additive manufacturing (AM) for Ni-based superalloys has gained
significance in aerospace and power-generation industries due to the ability to fabricate …

X-ray microcomputed tomography (microCT) has become an established method of testing
and analyzing additively manufactured parts in recent years, being especially useful and …

Progress towards widespread adoption of additively manufactured (AM) components
requires a strong understanding of the influence of pervasive pore defects on the material's …

Abstract DMLS or Direct Metal Laser Sintering is a technique which can be classified under
an additive manufacturing (AM). In this technique, metal powders are used to manufacture …

The fabrication of porous structures by additive manufacturing (AM) technologies has been
broadly explored over the past few years. Based on the application, most of the research …

In the past decade, particle reinforced foams have been intensively studied and applied in
diverse fields owing to their low weight-to-strength ratio, low cost, and tailorable physical …

In this study, three different methods, namely, selective laser melting (SLM), spark plasma
sintering (SPS), and casting techniques, were utilized to fabricate nickel alloy 718 samples …