Corrosion product deposits in the secondary side of nuclear power plant steam generators
may result in Tube Support Plate (TSP) clogging and tube fouling. Magnetite has an inverse …

Fouling on tube surfaces degrades the heat transfer characteristics of heat exchangers. The
objective of this study was to predict the distribution of deposits on the surface of heat …

From the review of literature conducted in recent years, it has become clear that, despite
extensive studies to obtain optimal parameters for a variety of thermodynamic systems and …

Single-phase convective heat transfer and steam-water two-phase flow boiling heat transfer
experiments have been carried out with a vertical seven-rod bundle at low flow conditions …

Abstract The Computational Fluid Dynamics (CFD) simulation of subcooled and saturated
boiling flow with multi-domain thermal coupling is a challenge, and the current methods to …

A multidomain computational procedure was applied to model the RD-14M steam generator.
It was based on the two-fluid Eulerian approach to model the water–steam flow, the blending …

An improved wall boiling model with consideration of thin film heat transfer was employed
with the Eulerian two-fluid model to investigate the three-dimensional flow boiling …

Since the primary coolant temperature decreases along the U-tube, so the secondary side
fluid in the steam generator tubes will receive non-uniform heating (NUH) from the primary …

Integrated small modular reactors (SMR) have garnered significant attention in the field of
nuclear energy, with the high-performance integrated steam generator being a critical …

The printed circuit heat exchanger (PCHE) is a promising alternative for the once-through
steam generator (OTSG) of small modular reactors due to its compact structure and high …