In the present paper, the laminar burning velocity and structure of near-stoichiometric
premixed laminar flames of methyl methacrylate (MMA) with and without trimethylphosphate …

Methyl methacrylate (MMA) is the main pyrolysis product of the widely used polymer
polymethyl methacrylate; therefore, a compact mechanism of MMA oxidation is of interest for …

This paper first presents particle image velocimetry measurements of the chemical time
scales versus equivalence ratio and the concentration of the inhibitor trimethyl phosphate for …

Abstract The PIV and PLIF OH techniques were used to experimentally study the structure of
a jet impinging on a flat obstacle with swirling and combustion of a propane–air mixture with …

Tomographic particle image velocimetry (PIV) has become a standard tool for 3D velocity
measurements in non-reacting flows. However, the majority of the measurements in flows …

The present paper reports experimental and modeling results on the laminar burning
velocity and structure of stoichiometric and fuel-rich premixed laminar flames of DME with …

A PIV study of a conical premixed methane–air Bunsen flame has shown that the inside of
the cone has a complex gas-dynamic structure. In this system, the velocity of the gas flow …

Flame impingement heat transfer is implemented in many industrial applications. The
laminar premixed Bunsen flame, impinging on a flat cold surface, represents a basic model …

The structure of a jet flow formed by the combustion products of conical propane-air flame
and impinging onto a normally oriented flat cooled surface is studied experimentally. The …

The present paper reports on an experimental study of flow structure and coherent structures
in impinging jets with strong swirl and combustion of lean propane/air mixture by a …