Membrane separation technologies have been widely used for water purification. However,
membrane fouling, which arises from unwanted deposition and adhesion of foulants …

Biofouling is the undesirable attachment of organisms and their by-products on surfaces. It
has become a severe problem in the industries that utilize devices and facilities in the …

Developing hybrid ultrafiltration (UF) membranes with high permeability and low fouling
tendency is important for a wide range of wastewater treatment applications. Herein, we …

End-group cross-linked sulfonated poly (arylene ether sulfone)(SPAES) membranes were
prepared using thiol capped SPAES (SH-SPAES) with different amounts of vinyl polysulfone …

Polysulfone ultrafiltration membranes were fabricated using various sizes (20, 40, and 90–
210 nm) of silver nanoparticles (nAg) blended in a dope solution. To characterize the …

Large-scale nanofiltration (NF) membrane fabrication relies on the use of harmful solvents
and dangerous monomers (eg, piperazine and trimesoyl chloride). Herein, we employed …

Safe drinking water for all is a major challenge and needs critical attention, as freshwater
aquifers are rapidly declining. A strategy based on addressing scarcity through membrane …

Implant-associated infections are a severe global concern, especially in the case of
orthopedic implants intended for long-term or permanent use. The traditional treatment …

Biofouling is a problem that needs to be urgently solved. Preparation of microstructures on
material surfaces is usually employed to inhibit biofouling, but it is restricted by the …

This research aims to define a protocol for nisin adsorption onto Ti6Al4V-Extra Low
Interstitial content (ELI) alloy to reduce the risk of peri-implant infections. The substrate is …