A pure ferrite and epoxy samples as well as the epoxy/ferrite composites with different 20
wt.%, 30 wt.%, 40 wt.%, and 50 wt.% weight ferrite contents have been prepared by the …

A low cost vibrating sample magnetometer (VSM) has been constructed by using an
electromagnet and an audio loud speaker; where both are controlled by a data acquisition …

In this study, a powder mixture of Zn, Fe 2 O 3 and NiO was used to produce different
compositions of Ni 1− x Zn x Fe 2 O 4 (x= 0.36, 0.5 and 0.64) nanopowders. High-energy …

Ferrite nanoparticles–having the compositions Li (x/2)(Ni 0.5 Zn 0.5)(1− x) Fe (2+ x/2) O 4
(x= 0, 0.2, 0.3)–have been prepared by the co-precipitation method. The prepared powders …

The development of stealth technology for military applications and increasing concerns of
electromagnetic pollution have garnered interest to design microwave absorbing materials …

Aluminium matrix composite materials are used in aeronautical and aerospace, defence and
automotive applications especially in the thermal management areas. Aluminium matrix …

The effects of glycine-to-nitrate molar ratio (G/N) and sintering temperature of 600° C on the
solution combustion synthesis of nanocrystalline Co 0.8 Mg 0.2 Fe 2 O 4 (CMFO) are …

In this paper, polycrystalline Co 2 TiO 4 ceramics have been synthesized using a sol-gel
process followed by annealing at different temperatures. The lattice size and the average …

The effect of grain growth via sintering temperature on some magnetic properties is reported
in this research. Ni 0.6 Zn 0.4 Fe 2 O 4 nanoparticles were mechanically alloyed for 6 h and …

Auto-combustion process was used for synthetization of Ni 1− x Zn x Fe 2 O 4 and Ni 1− x Zn
x La 0.02 Fe 1.98 O 4 (x= 0, 0.3, 0.5, 0.64 and 0.7) ferrite samples to investigate their …