CUORE is a proposed tightly packed array of 1000 TeO2 bolometers, each being a cube 5
cm on a side with a mass of 760 g. The array consists of 25 vertical towers, arranged in a …

The galvanostatic polarization method used to determine the electrodissolution process of
aluminum metal (Al) in acids (phosphoric acid; H 3 PO 4, and sulfuric acid; H 2 SO 4) mixture …

The effects of normal load, sliding speed, and surface roughness on the friction and wear of
high-purity niobium (Nb) during sliding without and with an introduction of water were …

Much interest was generated in the mid to late 1990s in an alternative cavity surface
processing technique called centrifugal barrel polishing, that mechanically polishes the …

Electropolishing (EP) is a standard process for the treatment of the interior surface of
niobium (Nb) superconducting radio-frequency (SRF) cavities used in particle accelerators …

In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of
inert plasma Ar/He gases in a vacuum chamber on the deposition of reactive niobium (Nb) …

Thin film coated Superconducting Radio Frequency (SRF) cavities are an attractive
substitute for the current industry standard of bulk Nb. As such, the SRF community has, in …

The effects of various electropolishing (EP) parameters such as duration, applied voltage,
working temperature, mechanical prepolishing and acid volume ratio on the EP process …

Optimization of SRF cavities mainly focuses on pushing the limits of bulk Niobium, cost
reduction of cavity fabrication and development of new SRF materials for future accelerators …

Large grain niobium (Nb) is being investigated for fabricating superconducting
radiofrequency cavities as an alternative to the traditional approach using fine grain …