This review article summarizes the hot deformation behavior of high entropy alloys (HEAs)
and the corresponding constitutive description of flow stress. The potential of hot working for …

During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

The aim of this research was to elucidate the underlying mechanism involved in the
formation of rare earth (RE) texture and pseudo fiber bimodal microstructure in the high …

Regions with sharp local textures, ie, macrozones, are common microstructural
inhomogeneities in titanium (Ti) alloys that significantly reduce the fatigue resistance of Ti …

Here we reported a heterogeneous fiberous structured Mg-5.6 Zn-0.6 Zr (wt%) alloy
obtained by conventional extrusion method, which exhibited high yield strength of∼ 345 …

Homogenization is one of the critical stages in the post-heat treatment of additive
manufacturing (AM) component to achieve uniform microstructure. During homogenization …

Owing to their excellent mechanical/functional properties, the lightweight magnesium alloys
containing long-period stacking ordered (LPSO) structures have recently received a great …

Dynamic recrystallization (DRX) mechanism of Ti-48Al-2Cr-2Nb (at.%) alloy was
investigated by thermal uniaxial compression experiments in this work. The deformed …

As a promising material for the new generation of high-speed railway contact wires, the
comprehensive optimization of the electrical conductivity, strength, hardness and wear …

A pre-cold-deformation process was applied for commercially pure titanium at cryogenic
temperature to activate high-density deformation twins, and subsequent hot-deformation …