Heat input is extremely important for achieving joints with high mechanical properties in
ferritic stainless steels. Thus, one of the objectives of this study is to show the effect of heat …

The present work reports the feasibility of wire arc additive manufacturing (WAAM) process
to manufacture SS 347 components for high temperature applications. The microstructure of …

In the present study, an attempt has been made to couple experimental data with a machine
learning (ML) approach to classify several weld configurations. An ML model has been …

The IR laser welding of aluminum and copper materials for lithium-ion batteries has
limitations due to inadequate joint strength caused by their high thermal conductivity and …

Conventional welding methods encounter significant challenges, including poor weldability,
low joint strength, and the formation of brittle intermetallic compounds, primarily due to the …

In the present study, laser welding of medium-thick TWIP steel plates was studied and the
microstructures and mechanical properties of the welded joints obtained at varied welding …

In this research work, super elastic nickel-titanium alloy (NiTinol) rods were joined using a
fully automated direct-driven rotary friction welding technique at various rotational speeds …

The mechanical and tribological characterization of stainless steel 308 L, which was
fabricated using wire arc additive manufacturing (WAAM), is presented in this work …

This research investigates the impact of root pass removal procedures, specifically back
grinding and back gouging, on the mechanical and microstructural properties of mild steel …

The extraordinary mechanical properties of AA7075-T6 alloy are comparable to that of steel,
but its low hardness, high wear rate at room and high temperature have limited its …