Selective catalytic reduction technology has been widely used to remove NO x. However,
the development of low-temperature selective catalytic reduction catalysts with high removal …

The required energy of the global industry is mostly generated from fossil fuel sources, such
as natural gas, gasoline, diesel, oil, and coal. Nitrogen oxides are one of the main air …

The development of high-efficiency catalysts is the key to the low-temperature NH3-SCR
technology. The introduction of SO2 and H2O will lead to poisoning and deactivation of the …

Abstract Metals doped MnOx-CeO 2 catalysts with a molar ratio of M: Mn: Ce= 1: 4: 5 (M=
Cu, Co, Cr, Ni, Fe, Sn, Mg) were prepared by a co-precipitation method for low-temperature …

Reducing carbon dioxide emissions is one of the largest energy and environmental
challenges currently faced globally. To achieve carbon neutrality, the development of new …

Manganese oxide has been recognized as one of the most promising gaseous
heterogeneous catalysts due to its low cost, environmental friendliness, and high catalytic …

A high-performance denitration catalyst based on Mn-Ce mixed-oxide derived from a
specific Mn/Ce precursorwas fabricated by solvothermal method. It exhibited outstanding …

A series of Sm-and/or Zr-doped MnO x-TiO 2 catalysts were prepared, and the catalysts
exhibited better N 2 selectivity and SO 2 resistance than the undoped MnO x-TiO 2 catalyst …

Selective catalytic reduction of NO with NH3 (NH3-SCR) is a powerful technique for the
abatement of NOx from stationary sources, and the currently used VOx/TiO2-based catalysts …

Developing effective and stable catalysts for low-temperature selective catalytic reduction
(SCR) of NO x remains challenging. Herein, we constructed a hierarchical structure by …