In this article, the tribological behavior and energy efficiency of surfaces coated with WC-
CoCr/HVOF were evaluated after a laser remelting process, using low and high laser energy …

In this study, a practical and swift approach for calculating the number of grains in a
microstructure and determining the ASTM grain size of Mg alloys was demonstrated using …

Abstract Modified multimodal (MMP) Cr3C2–NiCr coatings were fabricated by high-velocity
oxy-fuel (HVOF) spraying deposited on a CuCrZr alloy substrate. However, due to the lack of …

In this article, we analyse five types of coatings, in terms of their microstructure, hardness,
porosity, and wear resistance, in the as-sprayed state. The coatings are WC-based (WC …

A Cr3C2-Al2O3-NiCr composite coating was prepared on an INCONEL600 alloy surface
through high-velocity oxygen-fuel spraying followed by further processing through high …

The aim of this article is to explore the effect of re-melting times on the microstructure and
properties of Fe-based coating. In this study, the Fe-based coating is prepared on 316L …

Tungsten forms with carbon several chemical compounds (see also section C–W in Table I-
2.13): tungsten monocarbide δ-WC1±x phase (hexagonal structured), having almost …

Atmospheric plasma spraying (APS) consists in injecting a powder feedstock material in a
plasma jet to melt and accelerate the injected particles and spray them onto a substrate …

En este trabajo, se presentan los resultados provenientes de la generación de
recubrimientos base Níquel mediante proyección térmica por flama, seguidos de la …

The paper presents the results of the research aimed at determining the quality of coatings
applied by the HVOF spray coating technology and the advances in its application. WC-Co …