Novel Al-based nanocomposites reinforced with multi-walled carbon nanotubes were
produced by mechanical milling. Next, pressure-less sintering at 823K under vacuum and …

In this study, the effects of the addition of Ti powder and T6 heat treatment on the
microstructure and the mechanical properties of A356-based composite containing 0.5, 1.5 …

Aluminum composites with different amounts of exfoliated graphite nanoplatelets particles
were fabricated by powder metallurgy method. The mixture powders were consolidated at …

In this paper, an Al6061–10wt% SiC composite was prepared using the mechanical alloying
route. The morphology and the structure of the prepared powder, which change with milling …

In this paper, Al-based composites reinforced by Al–Fe intermetallic compounds have been
successfully fabricated by powder metallurgy technique. The reinforcements were generated …

This work focuses on structural changes of nanostructure 7075 aluminum alloy (Al7075)
during isothermal annealing. Nanostructured Al7075 was synthesized by mechanical …

Pure copper and its composites reinforced with Ni3Al particles were produced by powder
metallurgy (PM). Ni3Al powders were produced by mechanical ball milling from vacuum arc …

The aim of the study was to investigate the influence of microstructure and phase
composition on the mechanical behaviour of hydroxyapatite (HAp) and biphasic HAp/β …

A novel in situ core–shell-structured Ti@(Al–Si–Ti) particulate-reinforced A356 composite
was synthesized via powder thixoforming. It is noted that there is a significant improvement …

In this study, an Al–10 wt-% Al2O3 composite powder prepared by mechanical alloying was
investigated at different milling times. To evaluate the effects of the amount of methanol as a …