This study analyzes the effect of shot peening on the surface integrity of nickel-based single
crystal superalloys (SX) and the evolution of stress concentration factors caused by surface …

Laser shock peening (LSP) treatment was introduced to improve tensile fatigue behavior of
TB8 titanium alloy bolt. TB8 bolts surface integrity, tensile fatigue fracture and strengthening …

The objective of this study is to quantify the synergistic action of hydrogen and stress
concentration on the fatigue properties of pipeline steel. Notch tensile tests and fatigue-life …

The goal of the present paper is to discuss the reliability of a strain-based multiaxial Low-
Cycle Fatigue (LCF) criterion, recently proposed by some of the present authors, in …

The fatigue behavior of electrodeposited Zn-Ni alloy coating was investigated for its
suitability to replace Cd coatings in AISI 4140 steel studs applied in oil and gas industries …

The influence of the electrodeposition of cadmium and zinc-nickel and the stress
concentration effect on the fatigue behavior of AISI 4140 steel threaded components were …

Several models from the literature were used to predict the fatigue limit in notched
components subjected to biaxial cyclic loading. The predictions of these models are based …

High‐cycle fatigue (HCF) properties of 1Cr11Ni2W2MoV stainless steel impacted by a high‐
speed steel ball were studied by the foreign object damage (FOD) test and HCF test. The …

Many methods have been proposed to predict fatigue failure in the presence of notches,
among which is the Navarro-Rios model. This model is based on short-crack fracture …

Several models from the literature were used to predict the fatigue limit in notched
components subjected to biaxial cyclic loading. The predictions of these models are based …