Cold spray (CS) is a new kind of coating that has many potential uses, including
functionalizing surfaces, doing localized repairs, and mass production. Its fast deposition …

The paper considers the conducted study of the complex effect of low-pressure cold
spraying parameters, namely the nozzle inlet temperature, stand-off distance, and powder …

The effect of operating gas temperature and powder type on microstructure and mechanical
characteristics of cold spraying coatings deposited on EZ33A-T5 magnesium alloy was …

The article aims to understand the influence of the nozzle channel geometry on the
temperature and velocity parameters of the sprayed particles and the possibility of …

This study aims to calculate the velocity and temperature of zirconium oxide (ZrO2) particles
in the channel of a twin-combustion-chamber burner for high-velocity oxygen fuel (HVOF) …

Cold spray technology is a solid-state deposition technology. The particles are accelerated
in the Laval nozzle and plastically deform after deposition with the substrate to form a …

The article considers one of the main areas of research on cold spraying–the dynamics of
two-phase flow. To obtain coatings by cold spraying, a high-speed gas flow is used to …

The subject matter of this study is to use numerical simulation methods to study the influence
of the temperature of particles and substrates on the post-deposition coating during the multi …

The effect of temperature and air pressure at the supersonic nozzle inlet, as well as the
distance from the nozzle outlet to the surface of the substrate (stand-of-distance) on the …

Виконано дослідження впливу температури і тиску повітря на вході в надзвукове сопло,
а також дистанції від зрізу сопла до підкладки (дистанція напилювання), на коефіцієнт …