With an emphasis on the development of machine learning-based constitutive modeling
approaches, the state of constitutive modeling techniques and applications for metals and …

The macro-mechanical properties of metal and alloy are largely depended on their chemical
composition and microstructures resulting from the complicated processing and heat …

Although the general heat treatment improves the gear mechanical property, the surface
precision can not be guaranteed in a single technical process. To this end, a novel grinding …

The flow behaviors of 300M steel are studied by hot compression experiments at the
deformation temperatures of 1173~ 1423 K and strain rates of 0.01~ 10 s− 1. The flow stress …

The dynamic recrystallization (DRX) behavior of 42CrMo steel was studied by hot
compressive tests and cellular automaton (CA) simulation. The experimental results showed …

The dynamic recrystallization (DRX) behavior of magnesium alloy AZ31B with large initial
grain size was investigated. Two methods were applied to establish the DRX kinetics model …

The formation of prior particle boundaries (PPBs) in a new powder metallurgy superalloy
during hot isostatic pressing (HIP) is investigated. Also, the impact of subsequent hot …

Isothermal hot compression tests have been performed to study the hot working
characteristics of Ni-Cr-Mo-based C276 superalloy in the temperature range 1000–1200° C …

The work is conducted to uncover and simulate the dependence of the evolving anisotropic-
asymmetric yield behavior on the temperature for an Mg-Gd-Y alloy. Experiments were …

Abstract 42CrMo steel belongs to low-alloy medium carbon steel and also belongs to ultra-
high-strength steel. In this study, thermal compression tests (800° C-1200° C, 0.01 s-1-10s …