Welded joints are widely used in many sectors and represent the main joining technique
also in the marine industry. The welded joints are sites of high stress concentrations and are …

Steel T-welded joint structures have been largely applied in aerospace and marine
infrastructures. The weld length in T-weld joint structures is usually long, and it is difficult to …

The aim of this research was the development and application of the following structural
strain approaches for predicting the low-cycle fatigue life of AA 5083 welded joints: Finite …

Offshore and oil & gas industries have shown the interest toward the use of dissimilar
metals, so there is the problem of their joining. The aim of this research activity was to …

Nowadays explosion weld is widely used in marine structures, thanks to its reliability. AL/FE
explosive welded joints, used in shipbuilding applications, were investigated in this research …

能量方法是疲劳研究的重要方法, 新兴的红外热像技术则是实现这一方法的重要手段.
红外热像法作为一种无损, 实时及非接触的测试技术, 已被广泛地应用于疲劳研究中. 近年来 …

The traditional methods of fatigue assessment of welded joints have some limitations, and
are extremely time consuming. In order to overcome these difficulties, the Thermographic …

The Thermographic Method, which takes temperature increment as the fatigue indicator,
enables to predict the fatigue limit of materials and mechanical components in a relative …

A procedure to simulate the non-linear behavior of explosion welded joints used for
shipbuilding applications, starting only from hardness measurements, was developed. The …

Quantitative thermographic methodology (QTM), which takes energy dissipation as a fatigue
indicator, has been successfully applied to predict the fatigue life of materials and welded …