The effect of addition of 0.04 or 0.2 mass pct Ti on the mechanical properties of a Cu-2.0
mass pct Ni-0.5 mass pct Si alloy has been investigated. The addition of 0.04 mass pct Ti …

The Ni-Si-Ti system contains some attractive compound phases that can have uses in a
variety of applications. For example, the Ti5Si3 phase is a candidate alloy for a …

An additive alloying method is developed to fabricate NiTi microtubes, consisting of two
steps:(i) depositing a Ti-rich coating onto ductile, pure Ni wires (50 μm in diameter) via pack …

Compared with conventional casting process, laser direct metal deposition (LDMD) can
effectively reduce component segregation in non-equiatomic high entropy alloys (HEAs) …

A thermodynamic reassessment of the ternary Ni–Si–Ti system was performed by means of
CALPHAD (CALculation of PHAse Diagram) method. The fcc_A1/Ni 3 Si-L1 2 …

In this paper, microstructure and phase formation of ternary Ni-Ti-Si nanocomposite
synthesized by SHS method with the aim of preparing a precursor of high entropy alloys with …

Aluminide coatings were developed on a nickel alloy with the addition of RE (Ce, Y, La, and
Zr) oxides to the coating powder mixture. The specimens were aluminized at 760° C for 2 h …

Novel in situ TiC x reinforced Ni (Si, Ti) alloy composites with superior mechanical properties
were prepared at 1250° C for 30 min by pressureless sintering Ti 3 SiC 2 (10 and 20 vol%) …

In many industrial applications, large-sized SiC components are increasingly desired
through a conventional and pressureless brazing method. In present study, Ni-Si-Ti powder …

Abstract Nano-Si embedded Si 7 Ti 4 Ni 4 is synthesized with the melt spinning method,
which is facile, and applicable to mass-production. Si 7 Ti 4 Ni 4, the buffer material, is …