A Comparative Mini-Review on Transition Metal Oxides Applied for the Selective Catalytic Ammonia Oxidation (NH3-SCO)

M Jabłońska, A Mollá Robles - Materials, 2022 - mdpi.com
The selective catalytic oxidation of NH3 (NH3-SCO) into N2 and H2O is an efficient
technology for NH3 abatement in diesel vehicles. However, the catalysts dedicated to NH3 …

Progress of Ammonia Selective Catalytic Oxidation Research and Performance Improvement Strategy

M Zhang, H Wang, B Fan, C Liu, M Wang… - Journal of Environmental …, 2024 - Elsevier
Selective catalytic oxidation of ammonia (NH 3-SCO), as the main technology for treating
ammonia leaks from diesel engines, converts excess NH 3 into harmless N 2 and H 2 O …

Role of the Cu content and Ce activating effect on catalytic performance of Cu-Mg-Al and Ce/Cu-Mg-Al oxides in ammonia selective catalytic oxidation

S Górecka, K Pacultová, A Smýkalová… - Applied Surface …, 2022 - Elsevier
Copper-containing mixed metal oxides were studied as catalysts for selective catalytic
oxidation of ammonia. The performed research shows a high correlation between Cu …

Superior CuMgFe mixed oxide catalysts engineered by tuning the redox cycle for enhancing NOx removal performance

X Wu, J Liu, L Liu, Y Du, X Wu - Journal of Environmental Chemical …, 2022 - Elsevier
In this work, the CuMgFe layered double hydroxides (CuMgFe-LDH) with different Cu/Mg/Fe
molar ratios were fabricated, and derived catalysts (CuMgFe-LDO) were tested in the …

Kinetic and thermodynamic study of the wet desulfurization reaction of ZnO sorbents at high temperatures

E Ciro, A Dell'Era, A Hatunoglu, E Bocci, L Del Zotto - Energies, 2023 - mdpi.com
Hot gas conditioning is a remarkable stage for decreasing typical and harsh contaminants of
syngas produced in the biomass gasification process. Downstream contaminants containing …

Transition metal-containing MgFe ex-LDH mixed oxides, effective catalysts in the hydrodeoxygenation of benzyl alcohol

AT Toderaşc, I Atkinson, DC Culiţă, PE Mereuţă… - Applied Catalysis A …, 2023 - Elsevier
Abstract Several M-MgFe-LDH precursors were prepared via co-precipitation and then
calcined at 500° C to yield the corresponding M-MgFeO mixed oxide catalysts, which were …

[HTML][HTML] Cu and Co-modified SrTiO3 as materials for environmental applications

A Łącz, P Gwóźdź, A Mizera, S Górecka… - Surfaces and …, 2024 - Elsevier
SrTiO 3-based powder materials with the general formula: SrTi 0.98 Me 0.02 O 3, Sr 0.95 Ti
0.98 Me 0.02 O 3 and Sr 0.9 Ti 0.9 Me 0.1 O 3 where Me= Cu, Co were synthesised by …

Synthesis and Thermal Degradation of MAl4(OH)12SO4·3H2O with M = Co2+, Ni2+, Cu2+, and Zn2+

ABA Andersen, C Henriksen, Q Wang… - Inorganic …, 2021 - ACS Publications
The synthesis and thermal degradation of MAl4 (OH) 12SO4· 3H2O layered double
hydroxides with M= Co2+, Ni2+, Cu2+, and Zn2+ (“MAl4-LDH”) were investigated by …

Catalytic oxidation of ammonia over cerium-modified copper aluminium zinc mixed oxides

S Górecka, K Pacultová, D Fridrichová, K Górecki… - Materials, 2021 - mdpi.com
Copper-containing mixed metal oxides are one of the most promising catalysts of selective
catalytic oxidation of ammonia. These materials are characterized by high catalytic …

Ferrierite and Its Delaminated and Silica-Intercalated Forms Modified with Copper as Effective Catalysts for NH3-SCR Process

A Święs, A Kowalczyk, M Rutkowska, U Díaz… - Catalysts, 2020 - mdpi.com
The main goal of the study was the development of effective catalysts for the low-
temperature selective catalytic reduction of NO with ammonia (NH3-SCR), based on …