During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Relationships between microstructures and hardening nature of laser powder bed fused (L-
PBF) 316 L stainless steel have been studied. Using integrated experimental efforts and …

The dynamic recrystallization (DRX) behavior of a typical nickel-based superalloy is
investigated by the hot compression tests. Based on the conventional DRX kinetics model …

A critical evaluation of recrystallization vs. strain induced boundary migration (SIBM) as the
mechanism responsible behind the grain boundary engineering (GBE) in alloy 617 is made …

The objective of the study described here is to evaluate the effect of temperature, strain rate,
and strain on the microstructure of dynamically recrystallized nickel–chromium alloy (800H) …

Dynamic recrystallization (DRX) behavior in hot deformed (by uniaxial compression in a
thermomechanical simulator in the temperatures range 1173 K to 1373 K [900° C to 1100° …

Hot deformation behavior of a phosphorous-modified super austenitic stainless steel was
studied in the temperature range of 1173–1423 K and strain rate range of 0.001–10 s− 1 …

Hot compressive tests of a nickel-based superalloy are performed under the strain rate
range of 0.001–1 s− 1 and deformation temperature range of 920–1040° C. Optical …

The hot tensile deformation behaviors and fracture characteristics of a typical Ni-based
superalloy are studied by uniaxial tensile tests under the deformation temperature range of …

In this paper, the effect of strain rate (in the domain of 0.001 to 10 s− 1) on dynamic
recrystallization (DRX) kinetics in a nitrogen-enhanced 316L (N) austenitic stainless steel …