Quality analysis on 3D building models reconstructed from airborne laser scanning data
SO Elberink, G Vosselman - ISPRS Journal of Photogrammetry and …, 2011 - Elsevier
This paper presents a method to assess the geometric quality of 3D building models. The
quality depends on properties of the input data and the processing steps. Insight in the …
quality depends on properties of the input data and the processing steps. Insight in the …
Benchmarking the performance of mobile laser scanning systems using a permanent test field
The performance of various mobile laser scanning systems was tested on an established
urban test field. The test was connected to the European Spatial Data Research (EuroSDR) …
urban test field. The test was connected to the European Spatial Data Research (EuroSDR) …
Aspects of generating precise digital terrain models in the Wadden Sea from lidar–water classification and structure line extraction
The Wadden Sea is a unique habitat formed by the strong influence of tidal currents. Twice a
day the area is flooded and falls dry afterwards. Due to the force of tidal streams, strong …
day the area is flooded and falls dry afterwards. Due to the force of tidal streams, strong …
Alternative methodologies for LiDAR system calibration
Over the last few years, LiDAR has become a popular technology for the direct acquisition of
topographic information. In spite of the increasing utilization of this technology in several …
topographic information. In spite of the increasing utilization of this technology in several …
Assessment of relative accuracy of AHN-2 laser scanning data using planar features
AHN-2 is the second part of the Actueel Hoogtebestand Nederland project, which concerns
the acquisition of high-resolution altimetry data over the entire Netherlands using airborne …
the acquisition of high-resolution altimetry data over the entire Netherlands using airborne …
Error budget of LiDAR systems and quality control of the derived data
A Habib, KI Bang, AP Kersting… - … Engineering & Remote …, 2009 - ingentaconnect.com
Lidar systems have been widely adopted for the acquisition of dense and accurate
topographic data over extended areas. Although the utilization of this technology has …
topographic data over extended areas. Although the utilization of this technology has …
LIDAR strip adjustment: Application to volcanic areas
M Favalli, A Fornaciai, MT Pareschi - Geomorphology, 2009 - Elsevier
DEMs derived from LIDAR data are nowadays largely used for quantitative analyses and
modelling in geology and geomorphology. High-quality DEMs are required for the accurate …
modelling in geology and geomorphology. High-quality DEMs are required for the accurate …
Alternative methodologies for the internal quality control of parallel LiDAR strips
A Habib, AP Kersting, KI Bang… - IEEE Transactions on …, 2009 - ieeexplore.ieee.org
Light Detection and Ranging (LiDAR) systems have been widely adopted for the acquisition
of dense and accurate topographic data over extended areas. Although the utilization of this …
of dense and accurate topographic data over extended areas. Although the utilization of this …
LiDAR strip adjustment using multifeatures matched with aerial images
Airborne light detecting and ranging (LiDAR) systems have been widely used for the fast
acquisition of dense topographic data. Regrettably, coordinate errors always exist in LiDAR …
acquisition of dense topographic data. Regrettably, coordinate errors always exist in LiDAR …
Automated planimetric quality control in high accuracy airborne laser scanning surveys
G Vosselman - ISPRS Journal of photogrammetry and remote sensing, 2012 - Elsevier
With the increasing point densities of airborne laser scanning surveys, the applications of
the generated point clouds have evolved from the production of digital terrain models to 3D …
the generated point clouds have evolved from the production of digital terrain models to 3D …