Abstract Al–Zn–Mg–Cu alloys were fabricated with water-cooled copper casting. The
microstructure of the alloys was characterized by electron probe microanalysis (EPMA) …

The mechanical properties and stress corrosion cracking (SCC) resistance of 7xxx series
aluminium alloys are significantly affected by the composition and distribution of precipitates …

Correlation between precipitates evolution and mechanical properties of Al-Sc-Zr alloy with
Er additions during isothermal ageing were investigated by microhardness measurements …

A variable-rate non-isothermal aging (NIA) process that has two-stage heating and cooling
procedures was proposed for a ternary Al-Zn-Mg aluminum alloy aiming to obtain the …

Corrosion behavior on the building plane (XY-plane) and building direction plane (XZ-
plane) of laser powder bed fusion (LPBF) Al-Mn-Mg-Sc-Zr alloy was investigated based on …

The effects of electrochemical behavior of precipitates and dislocations on the stress
corrosion cracking (SCC) of Al–Zn–Mg–Cu alloys were investigated. Fine anodic η (MgZn 2) …

The 2024 aluminum alloy has excellent mechanical and low corrosion due to the existence
of the high Cu levels, which shortens its service life. In this paper, we have systematically …

In this study, we evaluated the microstructure, mechanical properties, and corrosion
resistance of four types of 7055 alloys with and without the addition of rare earth elements …

A recently developed 7A99 Al alloy was subjected to hot extrusion, solid solution and
artificial aging. The microstructure evolution and precipitation behavior were examined, and …

The effect of variable-rate non-isothermal aging (VR-NIA) on the properties of 7055
aluminum alloy was investigated by hardness, electrical conductivity, tensile tests and …